Mechanical Seals

 In mixing technology, the sealing of a rotating agitator shaft in the passage through a vessel wall represents the principal sealing task. Different sealing principles are used depending on operating conditions such as pressure, temperature, and speed.

Water pump seals are designed to improve seal performance and life where water interferes with seal faces. Water Pump seals are high quality, bi-directional, seal designs containing several material benefits and features. ... Water pump seals are very cost effective and much more reliable than conventional sealing methods.

Originally designed for the chemical industry, multi-spring seals have been used widely throughout all industrial markets. Their ability to provide even loading of mechanical seal faces and a wide range of material selection makes them the preferred choice for many pump and seal engineers.

This type of seal is generally used hot and cold water pump , oil pumps , refrigeration , compressor & fuel injection pumps . 

These Seal specially designed for any mixed and pressurized liquid in Vessel with Top Entry Agitators where no leakage of Highly Acidic Process Gas OR Fluids to the Environment can be tolerated. ... These Seals Designed with Cooling Water Jacket which ensure Cool Running of seals.

 Ceramic Seals exhibits high hardness, good abrasion resistance, high strength and stability. This makes them suitable for high load, varying shaft speed and high temperature applications. Also provides longer service life and operating safety.

A mechanical seal is simply a method of containing fluid within a vessel (typically pumps, mixers, etc.) ... To address this challenge there needs to be a seal between the shaft and the pump housing that can contain the pressure of the process being pumped and withstand the friction caused by the shaft rotating.

Conical Spring Seals is single conical spring, unbalanced seal with O-ring provided for secondary sealing. Since the Torque transmission is done by the single coil springs the seals are dependent on the directions of rotation, which is seen from the drive end of the shaft.

Dry-running mechanical face seals that consist of a mating (rotating) ring and a primary (stationary) ring. When operating, lifting geometry in the rotating ring generates a fluid-dynamic lifting force causing the stationary ring to separate and create a gap between the two rings.

Double (or dual) mechanical seals are designed to ensure maximum sealing safety. These seals virtually eliminate leakage of the fluid or gas being handled in pumps or mixers. ... These seals are increasingly used by companies to meet specific environmental goals or emissions requirements.

Cartridge seals are self-contained units consisting of a shaft sleeve, seal, and gland plate. The unit is fitted onto the pump shaft as a built assembly, and no further fitting is required. Cartridge seals are an attempt to over-come the fitting problems of conventional seals